Payment & Shipping Terms:
|Name:||Building Spray Painting Machine||Feature:||Energy Saving|
Energy Saving Building Spray Painting Machine , Durable Mortar Sprayer
Building Spray Painting Machine Introduction
Building Spray Painting Machine is a Screw Pump high-pressure mortar spraying machine, with advanced technology, simple operation and maintenance, it can be operated skillfully without special training. High pressure mortar spraying machine adapted spraying material included: putty powder, paint, latex paint, lacquer, cement mortar, dry mortar, thermal insulation, waterproofing materials, fireproof materials, insulation materials, sound-absorbing materials and other water-soluble material.
Building Spray Painting Machine Function:
spray all putty, such as putty powder, real stone paint, rock chip paint, cement slurry, imitation porcelain paint, diatom mud, water-in-water colorful paint, polyurethane waterproof paint, thick fire retardant paint, thermal insulation mortar, etc. Shape materials; all liquid materials such as latex paint, paint, floor paint, PVC anti-stone coating, white latex can be sprayed.
Building Spray Painting Machine Application
Building Spray Painting Machine technical parameter
|Name||Energy Saving Building Spray Painting Machine , Durable Mortar Sprayer|
|Hopper loading||45 kg|
Equipment cleaning and maintenance:
1. Disconnect the main power switch and unplug the power supply before cleaning the device.
2. Wipe the motor shield frame and the inside and outside of the hopper with a wet rag that wrings out the water.
3. Remove the hopper, open the drain valve under the delivery bin, and thoroughly clean the delivery bin. After cleaning, close the drain valve and reinstall the hopper (Note: the machine must be powered off when cleaning the bin)
4. Add about 15kg of clean water to the hopper. Press the power supply of the machine to remove the nozzle and the cap of the spray gun.
5. Close the air valve of the spray gun, open the material valve of the spray gun and clean the air valve. The spray gun head is aligned with the open space, and the material pipe and the spray gun are cleaned with high pressure gas and clean water. When cleaning, close the material valve for 3-5 seconds, gather the pressure inside the material tube, then quickly open the material valve and then close the material valve for 3-5 seconds. Then open the material valve quickly and repeat until the material tube is cleaned.
6. When cleaning the machine, it is strictly forbidden to extend the head hand and other debris into the hopper. It is strictly forbidden to aim the gun at the human body and the electrical box.
7. When the spray gun no longer has sewage flowing out, close the cleaning air valve, stop the machine, open the drain valve under the delivery bin, remove the remaining clear water in the delivery bin, and close the drain valve after the drain is over.
Remove the material tube and drive out the water in the material tube. The tray is taken up and the nozzle is kept in a safe place.
8. Remove the material from the tube and drive out the water in the material tube. The tray is taken up and the nozzle is properly kept. Turn off the machine's power switch, unplug the power cord, and the machine is clean.
Contact Person: Yu