Payment & Shipping Terms:
|Name:||Spray Texture Machine||Feature:||Low Noise|
|Type:||Wall Cement Plaster Machine||Power:||2*1500W|
|Voltage:||220V/380V Optional||Structure:||Simple Structure|
Low Noise Spray Texture Machine , Simple Structure Wall Cement Plaster Machine
Spray Texture Machine Application and Features
Spray Texture Machine is suitable for construction such as bolting grouting, backfilling, consolidation grouting etc. for the empty area under the road, railway, subway, hydropower station etc. If equipped with the spraying device, it also can be used for construction of basement and finish coat for interior and exterior wall of buildings.
Spray Texture Machine Features:
Spray Texture Machine technical parameter:
|Spray Texture Machine||Air compressor|
|Model: 4030J||Power: 2*1500W|
|Bare size: 850*440*460||Voltage: 220V/380V optional|
|Packing size: 880*450*470||Bare size: 800*450*420|
|Net weight: about 25 kg||Net weight: about 35 kg|
|Working efficiency: putty powder 100-200 flat / hour; real stone paint 80-100 flat / hour|
air compressor *1, barrel *1, storage barrel cover *1, pressure regulating table *1, deflation valve *1, long rod spray gun *1, double handle scraper *1, yin and yang angle * 1, round 5 mm nozzle * 1, 6 mm nozzle * 1, 7 mm nozzle * 1, fan nozzle 6510 model * 1, 6540 model * 1, 6570 model * 1, spare seal ring * 1, tracheal extension joint * 1 , elbow spray gun *1, raw material belt *1, silicone pad *1, latex paint tube *1, 12*8 trachea *1, 5*8 trachea *1, high pressure material tube *1, manual *1
Use of equipment:
(1) Air compressor
1. Pull out the switch button, turn on the power, and the machine starts. If the machine can't start, the Kia can be started below 0.4mpa.
2. When the switch button is pressed, the power is turned off and the machine stops running.
3. The machine is equipped with a safety valve. When the pressure exceeds the set value, the safety valve will sound and exhaust pressure relief;
4. When it is necessary to adjust the working pressure, please remove the pressure switch housing, adjust the rotating screw in the air pressure switch, rotate clockwise to increase the working pressure, counterclockwise to vice versa. Note that the power should be turned off before operation;
5. Before turning on the power, be sure to keep the machine off, turn on the power, turn on the switch, and it will be officially running.
(2) spraying machine
The machine can be used only after it has been assembled and confirmed. Open the lid of the tank and confirm that there is no foreign matter in the barrel (use 500ml-1000ml of water to lubricate the pipe for the first time), pour the evenly mixed material into the tank, and add it to 1/2 of the barrel for the first time. Press in the tank and press the pressure to the set value to start working. When using, open the air valve of the spray gun and open the spray gun valve to spray. When spraying, the nozzle should be 40-60 cm away from the working surface, and the spray gun should be evenly moved. After the material in the tank is sprayed, close the intake valve on the tank regulator table and open the bleed valve. Discharge the gas in the tank, open the lid, take out the silicone mat, and refill.
Contact Person: Yu