Payment & Shipping Terms:
|Name:||Spray Paint Machine For Walls||Feature:||Fast Speed|
|Voltage:||220V/380V Optional||Working Efficiency:||Putty Powder 100-200 Flat / Hour; Real Stone Paint 80-100 Flat / Hour|
OEM Spray Paint Machine For Walls / Gypsum Machine 220V/380V Optional
Spray Paint Machine For Walls Introduction
With advanced design, it is used for grouting or spraying PU, resin or other waterproof &leakage stoppage. The mortar spraying machine is suitable for: expansion joint leakage, settlement joint leaks, subway, tunnel leakage, leakage of dam leakage, ground level ground, cracks, empty drum reinforcement , indoor and outdoor coating, cement mortar spraying, dry mortar spraying, putty powder coating, waterproof grouting and surface spray coating, waterproof coating, grouting, smallpox spraying, wall painting, coating, landscape painting, embossment effect paint spraying, spraying, arts and crafts emulsion paint, really stone paint, spraying the rockery, sculpture painting, spraying sound-absorbing material.
Spray Paint Machine For Walls Features:
Spray Paint Machine For Walls technical parameter:
|OEM Spray Paint Machine For Walls / Gypsum Machine 220V/380V Optional||Air compressor|
|Model: 4030J||Power: 2*1500W|
|Bare size: 850*440*460||Voltage: 220V/380V optional|
|Packing size: 880*450*470||Bare size: 800*450*420|
|Net weight: about 25 kg||Net weight: about 35 kg|
|Working efficiency: putty powder 100-200 flat / hour; real stone paint 80-100 flat / hour|
air compressor *1, barrel *1, storage barrel cover *1, pressure regulating table *1, deflation valve *1, long rod spray gun *1, double handle scraper *1, yin and yang angle * 1, round 5 mm nozzle * 1, 6 mm nozzle * 1, 7 mm nozzle * 1, fan nozzle 6510 model * 1, 6540 model * 1, 6570 model * 1, spare seal ring * 1, tracheal extension joint * 1 , elbow spray gun *1, raw material belt *1, silicone pad *1, latex paint tube *1, 12*8 trachea *1, 5*8 trachea *1, high pressure material tube *1, manual *1
Equipment maintenance and cleaning:
1. The machine should be placed in a place that is dry, ventilated, rainproof, waterproof, fireproof, sun-protected, and where people and vehicles do not pass often;
2. Disassemble the aluminum cap of the spray gun and clean the aluminum cap and nozzle of the spray gun before the work is completed every day to prevent the material from solidifying and clogging. The aluminum cap of the spray head is stuck and cannot be disassembled or replaced.
3. It is forbidden to stir the material directly in the drum with a stirrer to avoid damage to the anti-rust coating on the barrel wall. It is forbidden to contact any part of the whole machine with corrosive materials such as strong acid and alkali. Avoid sharp objects from contacting the material pipe to avoid burst damage.
4. When cleaning, first clean the inner wall of the barrel with water, then add 1/3 of water, pressurize the feeding barrel, after the pressure reaches 0.6MP, remove all the nozzles of the aluminum cap of the gun head, align with the open space, open the material valve Use high pressure and clean water to rinse the bottom of the drum and the spray gun.
1. The pressure gauge kit on the drum is prohibited from colliding at any time;
2. No debris can be placed above the venting valve of the drum, and no part of the human body can be detected above the venting valve;
3. It is forbidden to contact any part of the whole machine with corrosive materials such as strong acid and alkali. Avoid sharp objects from contacting the material pipe to avoid burst damage;
4. It is strictly forbidden to point the gun mouth at yourself or others and the location of potential safety hazards;
5. The cross-sectional area of the power cable should be more than 4 square meters of the national standard;
6. When the spray gun is not discharging and the material tube is soft, the gas in the barrel must be drained immediately to prevent the silicone mat from being broken down.
Contact Person: Yu