Payment & Shipping Terms:
|Name:||Putty Spray Machine||Air:||Compressed Air|
|Working Pressure:||5-8Mpa||Capacity:||About 50 Kg|
Compressed Air Putty Spray Machine / Waterproof Industrial Painting Equipment
Putty Spray Machine Function:
sprayable polyurethane waterproof material, JS waterproof coating, k11 waterproof slurry, polymer, cement-based permeable crystallization, modified asphalt, and other water-based waterproofing, and (with thinner) oily waterproof coating.
Putty Spray Machine Features:
1. It can effectively save the heavy physical strength and reduce the labor intensity of construction workers during the construction process. With the advancement of society, physical labor will gradually be replaced by machinery;
2. Significantly improve work efficiency and save a lot of time. In today's society, the pace of life of people has become faster, the requirements for work efficiency are getting higher and higher, and time is money;
3. It can be easily constructed on the construction surface such as wall and roof with relatively difficult construction difficulty;
4. It can effectively avoid the phenomenon of dripping and dripping of paint during the normal construction process, which can keep the construction site clean and save raw materials;
5. The machine has simple structure, less wear parts and convenient maintenance and repair;
Putty Spray Machine Parameters
|Model 3015||Model 3015-60|
|Net weight: about 48 kg||Net weight: about 55 kg|
|Capacity: about 50 kg||Capacity: about 150 kg|
|Working pressure: 5-8Mpa|
|Voltage: 220V single phase electricity|
|Vertical Yang Cheng: ≤ 20 meters|
|Working efficiency: about 300 square meters / hour|
|Nozzle diameter: circular: φ4mmφ5mmφ6mm; sector: φ6515φ6525φ6540|
Loading list: host *1, storage barrel cover *1, pressure regulating table *1, deflation valve *1, 10 meters 6 points high pressure explosion-proof material tube *1, 5*8 air tube kit *1, explosion-proof air tube *1 , 1800 spray gun *1, 4.5.6mm round nozzles 1, 6515.6525, 6540 fan nozzles 1, inner wire head * 1, funnel * 1, raw material belt * 1, spare seal ring * 1, manual *1
Equipment maintenance and cleaning:
1. Check the screws of the air compressor once a week, and whether the power connector is loose or not;
2. The machine should be placed in a place that is dry, ventilated, rainproof, waterproof, fireproof, sun-protected, and where people and vehicles do not pass often;
3. Disassemble the aluminum cap of the spray gun and clean the aluminum cap and nozzle of the spray gun before the work is completed every day to prevent the material from solidifying and clogging. The aluminum cap of the spray head is stuck and cannot be disassembled or replaced.
4. The spraying machine should be thoroughly cleaned once every 3-5 days. The material containing cement curing agent and other quick-drying materials should be cleaned once a day;
5. It is forbidden to stir the material directly in the drum with a stirrer to avoid damage to the anti-rust coating on the barrel wall. It is forbidden to contact any part of the whole machine with corrosive materials such as strong acid and alkali. Avoid sharp objects from contacting the material pipe to avoid burst damage.
6. When cleaning, first clean the inner wall of the barrel with water, then add 1/3 of water, pressurize the feeding barrel, after the pressure reaches 0.6MP, remove all the nozzles of the aluminum cap of the gun head, align with the open space, open the material valve Use high pressure and clean water to rinse the bottom of the drum and the spray gun.
Contact Person: Yu