Payment & Shipping Terms:
|Name:||Industrial Spray Painting Machine||Feature:||Multi Function|
|Nozzle:||Large Diameter Nozzle||Power:||1500W|
|Working Pressure:||5-8Mpa||Capacity:||About 50 Kg|
Multi Function Industrial Spray Painting Machine Large Diameter Nozzle
Industrial Spray Painting Machine Features
Only three persons are required for operation. One person delivers material, one person operates the spraying gun, a third person does the assistant work (for instance: assistant to remove the hose). The whole processes such as water adding, mixing and delivery of the material etc. are implemented by the machine automatically. Compared with the manual operation, it can save manpower, material resources, money and precious time, as well makes the construction quality better and more reliable than the traditional manual operation.
Industrial Spray Painting Machine Function:
sprayable polyurethane waterproof material, JS waterproof coating, k11 waterproof slurry, polymer, cement-based permeable crystallization, modified asphalt, and other water-based waterproofing, and (with thinner) oily waterproof coating.
Industrial Spray Painting Machine Parameters
|Net weight: about 55 kg|
|Capacity: about 150 kg|
|Working pressure: 5-8Mpa|
|Voltage: 220V single phase electricity|
|Vertical Yang Cheng: ≤ 20 meters|
|Working efficiency: about 300 square meters / hour|
|Nozzle diameter: circular: φ4mmφ5mmφ6mm; sector: φ6515φ6525φ6540|
Use of equipment:
1. Before the air compressor is connected to the power supply, make sure that the machine is in the off state, turn on the power, and turn on the switch to be officially operated;
2. The machine is equipped with a safety valve. When the pressure exceeds the set value, the safety valve will sound and exhaust pressure relief;
3. Do not touch high temperature parts during operation, such as cylinder head, exhaust pipe, check valve, etc., to avoid burns;
4. The cross-sectional area of the power cable should be more than 4 square meters, and the power cord should not be too long;
5. The machine can be used only after it has been assembled and confirmed. Open the lid of the tank and confirm that there is no foreign matter in the barrel (use 500ml-1000ml of water to lubricate the pipe for the first time), pour the evenly mixed material into the tank, and add it to 1/2 of the barrel for the first time. After the feeding is completed, cover the lid and start the air compressor, press it into the tank, and press the pressure to the set value to start working. Open the gun air valve before use, and open the gun material valve to spray. When spraying, the nozzle should be about 40-60cm away from the working surface, and move the spray gun evenly. Don't let it go. After the material in the tank is sprayed, close the intake valve on the tank regulator table and open the bleed valve. The gas in the tank is discharged and fed through the funnel into the tank.
Equipment maintenance and cleaning:
1. Check the screws of the air compressor once a week, and whether the power connector is loose or not;
2. The machine should be placed in a place that is dry, ventilated, rainproof, waterproof, fireproof, sun-protected, and where people and vehicles do not pass often;
3. Disassemble the aluminum cap of the spray gun and clean the aluminum cap and nozzle of the spray gun before the work is completed every day to prevent the material from solidifying and clogging. The aluminum cap of the spray head is stuck and cannot be disassembled or replaced.
4. The spraying machine should be thoroughly cleaned once every 3-5 days. The material containing cement curing agent and other quick-drying materials should be cleaned once a day;
5. It is forbidden to stir the material directly in the drum with a stirrer to avoid damage to the anti-rust coating on the barrel wall. It is forbidden to contact any part of the whole machine with corrosive materials such as strong acid and alkali. Avoid sharp objects from contacting the material pipe to avoid burst damage.
6. When cleaning, first clean the inner wall of the barrel with water, then add 1/3 of water, pressurize the feeding barrel, after the pressure reaches 0.6MP, remove all the nozzles of the aluminum cap of the gun head, align with the open space, open the material valve Use high pressure and clean water to rinse the bottom of the drum and the spray gun.
Contact Person: Yu