Payment & Shipping Terms:
|Name:||Mortar Spraying Machine||Feature:||Reasonable Split Structure|
|Net Weight:||About 750 Kg||Work Pressure:||5-8Mpa|
Waterproofing Coatings Mortar Spraying Machine Reasonable Split Structure
Mortar Spraying Machine Application
Mortar Spraying Machine Function:
sprayable polyurethane waterproof material, JS waterproof coating, k11 waterproof slurry, polymer, cement-based permeable crystallization, modified asphalt, and other water-based waterproofing, and (with thinner) oily waterproof coating.
Mortar Spraying Machine technical parameter
|Spraying machine 30L||Spraying machine 60L||Spraying machine 80L|
|Net weight: 20 kg||Net weight: 23 kg||Net weight: 25 kg|
|Model: 4001F-30||Model: 4001F-60||Model: 4001F-80|
|Working pressure: 5-8Mpa|
|Vertical Yang Cheng: ≤ 20 meters|
|Nozzle diameter: circular: φ4mmφ5mmφ6mm; sector: φ6515φ6525φ6540|
|Capacity: 50 kg||Capacity: 150 kg||Capacity: 220 kg|
Loading list: storage barrel *1, storage barrel cover *1, pressure regulating table *1, deflation valve *1, 10 m 6 points high pressure explosion-proof material tube *1, 5*8 trachea kit *1, 1800 spray gun *1, 4.5.6mm round nozzles each 1,6515.6525.6540 fan nozzles 1, inner wire heads *1, raw material belts *1, spare seals *1, instructions *1
maintenance and cleaning:
1. Disassemble the aluminum cap of the spray gun and clean the aluminum cap and nozzle of the spray gun before the work is completed every day to prevent the material from solidifying and clogging. The aluminum cap of the spray head is stuck and cannot be disassembled or replaced.
2. The spraying machine should be thoroughly cleaned once every 3-5 days. The material containing cement curing agent and other quick-drying materials should be cleaned once a day;
3. It is forbidden to stir the material directly in the drum with a stirrer to avoid damage to the anti-rust coating on the barrel wall. It is forbidden to contact any part of the whole machine with corrosive materials such as strong acid and alkali. Avoid sharp objects from contacting the material pipe to avoid burst damage.
4. When cleaning, first clean the inner wall of the barrel with water, then add 1/3 of water, pressurize the feeding barrel, after the pressure reaches 0.6MP, remove all the nozzles of the aluminum cap of the gun head, align with the open space, open the material valve Use high pressure and clean water to rinse the bottom of the drum and the spray gun.
Contact Person: Yu